Leaf springs are the backbone of commercial-vehicle suspension because they carry heavy loads, distribute weight across the chassis, and are simple and durable to maintain. The main types used on trucks, buses and trailers are conventional multi-leaf springs, parabolic springs (single and two-stage), and air-suspension springs (including Z-springs), each suited to a different load and ride requirement. This guide explains the types, their benefits, and where each is applied.
Summary
• Leaf springs both support the load and locate the axle, making them ideal for heavy vehicles.
• Multi-leaf springs are rugged and best for heavy, shock loads; parabolic springs are lighter and give a smoother ride.
• Air and Z-spring suspensions add ride comfort for buses and load-sensitive cargo.
• Leaf springs are valued for high load capacity, durability, simple maintenance and low cost.
• The right spring depends on the vehicle type, axle position and duty cycle.
What is a leaf spring and why do commercial vehicles use them?
A leaf spring is a curved, semi-elliptical steel spring made of one or more layers (leaves) that flex to absorb road shock and support the vehicle’s weight. Unlike coil springs, a leaf spring does two jobs at once: it carries load and locates the axle, resisting fore-aft and lateral forces. That structural role, combined with high load capacity and low cost, is why leaf springs remain the standard suspension for trucks, buses and trailers worldwide.
Types of leaf springs for commercial vehicles
Conventional multi-leaf springs
The traditional design stacks several steel leaves of similar thickness. Inter-leaf friction adds natural damping, and the many leaves share heavy and uneven loads well. Multi-leaf springs are rugged, easy to repair leaf-by-leaf, and remain the default for tippers, heavy-duty trucks and off-road applications where loads are high and variable.
Parabolic leaf springs
Parabolic springs use fewer leaves, each tapered to a parabolic profile so stress spreads evenly along the leaf. With fewer leaves and less friction, they are lighter, ride more smoothly, and improve fuel economy through reduced weight. They come in single-stage and two-stage variants and are increasingly preferred for on-highway trucks, buses and LCVs.
Semi-elliptical springs
The classic semi-elliptical (half-elliptical) shape is the most common leaf spring layout, mounted to the chassis at both ends with the axle at the centre. Most conventional and parabolic springs use this geometry.
Bogie and trailer suspension assemblies
Multi-axle trailers and tandem/tridem setups use bogie assemblies that link axles so load is shared evenly across them. Purpose-built trailer parabolic and mechanical suspension assemblies handle the high, distributed loads of freight trailers.
Air-suspension springs and Z-springs
Modern buses and load-sensitive vehicles often combine leaf elements with air suspension for a soft, height-adjustable ride. Z-springs and air-link designs pair a leaf spring with an air bag to deliver both load capacity and passenger ride comfort the standard for premium buses and some cargo applications.
Allied components
Complete suspension performance also depends on stabiliser (anti-roll) bars, shackles, bushes, U-bolts and centre bolts, which locate and support the spring assembly.
Benefits of leaf springs in commercial vehicles
High load capacity: Leaf springs handle the heavy payloads of commercial vehicles better than most alternatives, spreading load across the chassis. Durability and reliability: With few moving parts and rugged construction, they withstand harsh roads and long service lives. Axle location: They position and stabilise the axle, removing the need for extra linkages. Simple maintenance: Damaged leaves can be inspected and replaced individually, keeping vehicles on the road. Cost-effectiveness: They offer a strong balance of performance and price, lowering total cost of ownership for fleets. Load distribution: In multi-axle setups they share weight evenly, protecting the vehicle and the road surface.
Applications by vehicle type
| Vehicle type | Typical leaf spring | Why |
| Heavy trucks & tippers | Conventional multi-leaf | Handles heavy, shock and off-road loads |
| On-highway trucks | Parabolic (single/two-stage) | Lighter, better ride and fuel economy |
| Buses | Parabolic & air suspension (Z-spring) | Passenger ride comfort |
| Light commercial vehicles (LCV) | Parabolic | Payload efficiency and comfort |
| Trailers | Bogie & trailer parabolic assemblies | Multi-axle load sharing |
| SUVs & MUVs | Parabolic or conventional | Balance of load and comfort |
Materials and manufacturing
Commercial-vehicle leaf springs are made from silico-manganese spring steels such as EN45, EN45A, 60Si7 or SUP grades, chosen for high fatigue strength. Manufacturing involves shearing and rolling the leaves to a precise profile (Akar rolls from 6 mm to 60 mm), heat treatment for the correct hardness and fatigue life, shot peening to boost fatigue resistance, and assembly with centre bolts and clips all under an IATF 16949 quality system for OEM supply.
Maintenance tips for fleet operators
Inspect springs regularly for cracked or broken leaves, sagging, corrosion and worn bushes or shackles. Avoid overloading beyond the rated capacity, keep U-bolts torqued to specification, and replace fatigued springs as a set to keep both sides balanced. Catching issues early prevents axle misalignment, uneven tyre wear and breakdowns.
How to choose the right leaf spring
Match the spring to the vehicle’s load rating, axle position, ride requirement and duty cycle. Choose multi-leaf for maximum durability under heavy or off-road loads, parabolic for lighter weight and comfort, and air/Z-spring systems where passenger comfort is a priority. Always specify OEM-grade springs of the correct material and load rating from a proven manufacturer.
Akar Auto Industries manufactures conventional, parabolic, trailer and air-suspension leaf springs to OEM specification for heavy trucks, buses, LCVs, SUVs and trailers.
Conclusion
Leaf springs remain the backbone of commercial-vehicle suspension because they carry heavy loads, locate the axle and last. Match the type to the job: multi-leaf for rugged heavy duty, parabolic for lighter weight and comfort, air and Z-springs for passenger ride. Specify OEM-grade springs of the correct material and rating, maintain them well, and your fleet stays reliable.
FAQs
1. What are the main types of leaf springs for commercial vehicles?
The main types are conventional multi-leaf springs, parabolic springs (single and two-stage), and air-suspension springs including Z-springs. Trailers also use bogie assemblies for multi-axle load sharing. Each suits a different load and ride requirement.
2. What is the difference between multi-leaf and parabolic springs?
Multi-leaf springs use many equal-thickness leaves and are rugged for heavy, shock loads. Parabolic springs use fewer tapered leaves, making them lighter, smoother-riding and more fuel-efficient. Many fleets use both depending on the axle and duty.
3. Why are leaf springs used in trucks and buses?
Leaf springs carry heavy loads, distribute weight across the chassis, and locate the axle all in one simple, durable, low-cost component. This combination makes them ideal for commercial vehicles.
4. What material are commercial-vehicle leaf springs made from?
They are made from silico-manganese spring steels such as EN45, EN45A, 60Si7 or SUP grades, selected for high fatigue strength, then heat treated and shot peened for durability.
5. How do I know when to replace a leaf spring?
Replace a leaf spring if any leaf is cracked or broken, or if the vehicle sags, rides harshly, pulls to one side or shows uneven tyre wear. A broken leaf is a safety issue replace springs as a set to keep both sides balanced.








